Select Currency:

SPIROL’s Series 24 Tapered Inserts are designed for use in tapered holes with an 8° (included) draft angle and are installed by using heat or ultrasonic vibration. These Inserts are similar to SPIROL’s standard Series 14 Tapered Inserts, but are designed for use in alternate hole sizes most commonly found in Europe. The Series 24 Inserts are made-to-order in metric thread sizes ranging from M2 up to M8.

If you would like assistance in selecting the most appropriate Insert for your application, please contact SPIROL for complimentary technical support.

1 - 8 of 8 | Results Per Page |   | Unit of Measure
1 

Item #

Supply Status

Units per Box

Thread Size

Overknurl Ø (A)

Length (L)

Material Type

Price Per Box

Sort by
151313 N/A Not Stocked N/A 1 N/A M2 x 0.4 N/A 4.1 mm N/A 5.0 mm N/A Brass QUOTE
151314 N/A Not Stocked N/A 1 N/A M2.5 x 0.45 N/A 4.1 mm N/A 5.0 mm N/A Brass QUOTE
151315 N/A Not Stocked N/A 1 N/A M3 x 0.5 N/A 4.7 mm N/A 5.5 mm N/A Brass QUOTE
151316 N/A Not Stocked N/A 1 N/A M3.5 x 0.6 N/A 5.5 mm N/A 6.0 mm N/A Brass QUOTE
151317 N/A Not Stocked N/A 1 N/A M4 x 0.7 N/A 6.0 mm N/A 7.5 mm N/A Brass QUOTE
151318 N/A Not Stocked N/A 1 N/A M5 x 0.8 N/A 7.1 mm N/A 9.0 mm N/A Brass QUOTE
151319 N/A Not Stocked N/A 1 N/A M6 x 1.0 N/A 8.7 mm N/A 10.0 mm N/A Brass QUOTE
151320 N/A Not Stocked N/A 1 N/A M8 x 1.25 N/A 11.1 mm N/A 12.0 mm N/A Brass QUOTE
1 - 8 of 8 | Results Per Page |   | Unit of Measure
1